Simex SIMPACT SPI-94, Руководство пользователя

Страница: 49 / 52

User manual for flow meter with pulse input SPI-94
Parameter Description Default value User's value
Desc.
page
FrEq Maximum input frequency 300 (Hz) 28
ZEro t Maximum time between two following pulses 1.0 (sec.) 28
mEAS t Width of measurement window 0.5 (sec.) 28
Configuration of current flow display (“FLouu” menu)
F PrEc
Decimal point position (precision of flow rate
displaying)
0.0 29
F unit
The unit of volume (Cubic measure) for flow rate
displaying
lit. 29
Ftunit The unit of time for flow rate displaying min 29
Configuration of Total Flow Counter displaying mode (”totAL” menu)
t PrEc
Decimal point position ( precision of total flow
counter displaying)
0.000 29
t unit The unit of total flow counter displaying lit. 29
E Clr Active level/edge of total flow zeroing input oFF 30
Power on initialization configuration
Init d Kind of value displayed after device power on FLo 30
Configuration of data filtration (”FiLtEr” menu)
vALUE Filtering ratio 0 30
droP
Measured value change causing of temporal
filtering deactivation
20.0 (%) 30
Active current output configuration (“OUtPUt” menu)
OUtmod Current output mode
„0-20” (mA)
31
vALUE Kind of value controlled active current output FLo 31
OUt LO
Display value for 0 mA or 4 mA (depend „OUtmod”)
current output
0.0 31
OUt HI Display value for 20 mA current output 200.0 31
t PrEc
Precision of “ OUt LO ” and “ OUt HI ” parameters
displaying, while active current output is controlled
due to total flow counter value. 0 31
t unit
The unit of “ OUt LO ” and “ OUt HI ” parameters
displaying, while active current output is controlled
due to total flow counter value. lit. 31
Lo r Extension of the bottom of the nominal output range 5.0 32
Hi r Extension of the top of the nominal output range 5.0 32
AL Current output value on critical exception 22.1 (mA) 32
Display parameters
49