Simex PUR-49D, Руководство пользователя

Страница: 66 / 80

User manual - CONTROLLER PUR-49D
Register Write Range Register description
43h Yes 0 ÷ 3
“ Sour ” parameter in “ rEL2 ” menu:
0 - “ InPU ” option; 1 - “ modb ” option; 2 - “ PidH ” option; 3 - “ PidC ”
option;
44h Yes 0 ÷ 5
“ modE ” parameter in “ rEL2 ” menu:
0 - “ noAC ” mode; 1 - “ on ” mode; 2 - “ oFF ” mode; 3 - “ in ” mode;
4 - “ out ” mode; 5 - “ PULS ” mode
45h Yes -999 ÷ 9999 “ SEtP ” parameter in “ rEL2 ” menu, no decimal point included
46h Yes -999 ÷ 999 “ HySt ” parameter in “ rEL2 ” menu, no decimal point included
47h Yes 0 ÷ 999
“t on” parameter in “rEL2” menu, expressed in tenth of seconds or
tenth of minutes depend on “unit” parameter - register no. 47h)
48h Yes 0 ÷ 999
“toFF” parameter in “rEL2” menu, expressed in tenth of seconds
or tenth of minutes depend on “unit” parameter - register no. 47h)
49h Yes 0 ÷ 1
“unit” parameter in “rEL2” menu:
0 - seconds; 1 - minutes
4Ah Yes 0 ÷ 2
“AL” parameter in “rEL2” menu (only when rEL2 is relay output): 0
- no changes; 1 - on; 2 - off
4Bh Yes -999 ÷ 9999 “ SEt2 ” parameter in “ rEL2 ” menu, no decimal point included
4Ch Yes -999 ÷ 9999 “ InLo ” parameter in “ rEL2 ” menu, no decimal point included
4Dh Yes -999 ÷ 9999 “ InHi ” parameter in “ rEL2 ” menu, no decimal point included
4Eh Yes 0 ÷ 9999 “ PEri ” parameter in “ rEL2 ” menu, no decimal point included
4Fh Yes 0 ÷ 9999 “ H on ” parameter in “ rEL2 ” menu, no decimal point included
50h Yes 0 ÷ 9999 “ HoFF ” parameter in “ rEL2 ” menu, no decimal point included
51h Yes 0 ÷ 1
“ Acti ” parameter in “ AL ” menu, (only when rEL2 is OC-type output):
0 - “ noCH ” option ; 1 - “ USdu ” option ;
52h Yes 0 ÷ 1000 “ duty ” parameter in “ AL ” menu (only when rEL2 is OC-type output)
53h Yes 0 ÷ 1000
Current OC type output fill factor expressed as a percentage without
the decimal point (only where
rEL2 is the OC type output)
54h Yes -999 ÷ 9999 “ OFFS ” parameter in “ rEL2 ” menu, no decimal point included
55h Yes 0 ÷ 1000 “ SEnS ” parameter in“ rEL2 ” menu, no decimal point included
56h Yes 0 ÷ 3
“ Sour ” parameter in “ rEL3 ” menu:
0 - “ InPU ” option; 1 - “ modb ” option; 2 - “ PidH ” option; 3 - “ PidC ”
option;
57h Yes 0 ÷ 5
“ modE ” parameter in “ rEL3 ” menu:
0 - “ noAC ” mode; 1 - “ on ” mode; 2 - “ oFF ” mode; 3 - “ in ” mode;
4 - “ out ” mode; 5 - “ PULS ” mode
58h Yes -999 ÷ 9999 “ SEtP ” parameter in “ rEL3 ” menu, no decimal point included
59h Yes -999 ÷ 999 “ HySt ” parameter in “ rEL3 ” menu, no decimal point included
5Ah Yes 0 ÷ 999
“t on” parameter in “rEL3” menu, expressed in tenth of seconds or
tenth of minutes depend on “unit” parameter - register no. 58h)
66