Simex MultiCon CMC-99/141, Руководство пользователя

Страница: 164 / 332

User Manual For - CONTROLLER/DATA RECORDER MultiCon CMC-99/141
The arrows placed in the upper right corner of the screen allow you to
switch between built-in outputs. The middle button allows you to select
a specific built-in output from the list directly.
Parameters common for
Built-in outputs
:
– Name - each output already has a name given by the device and the user cannot
change it, for the description of the Name parameter see Fig. 7.84 ,
– Source – this parameter contains a list of logical channels (up to 60), where the
selected logical channel will be a data source for this built-in output (see Fig. 7.85 ).
Fig. 7.84. Description of Name parameter in Built-in outputs menu
Fig. 7.85. Data source settings for built-in output (for SSR output module)
The list of built-in output modules (slot tag and type of module) is locate in
the
Hardware configuration
parameters block in the
Device information
menu
(see Fig. 7.31 in Chapter 7.4. ).
164
i
Slot tag
Output number inside slot
Type of output
1
2