background image

Safety / Installation

2

For parts or assistance, call Simer Customer Service at 

1-800-468-7867 / 1-800-546-7867

GENERAL SAFETY

The pump motor is equipped with an automati-

cally resetting thermal protector

and may restart unexpectedly.

DO NOT plug in the pump while standing in water or on a wet
or damp surface.

DO NOT use in water where fish are present (oil in motor can
kill fish).

DO NOT pick up the pump by the power cord.

Protect the electrical cord from sharp objects, hot surfaces, oil,
and chemicals. Avoid kinking the cord.

Unplug the pump before servicing it or attempting to clean it.

Secure the discharge hose before starting the pump. An unse-
cured discharge hose may whip, which can cause personal
injury and property damage.

Keep the pump, base, and inlet screen free of debris and for-
eign objects. 

SPECIFICATIONS

Power supply required..........................................115V, 60 HZ.

Liquid Temp. Range........................................Max. 77°F (25°C)

Operation Position.........................................................Vertical

Individual Branch Circuit Required  ..............................15 Amp

Operating Depth

Beginning min...............................3/4"

(water level)

Ending max. ..................................1/4"

Discharge .........................................................1" NPT (25 mm)

DESCRIPTION

The submersible pump is designed for water removal from pool
covers in home swimming pool applications.  Unit is construct-
ed of hi-impact corrosion resistant plastic. Screened inlet and
base prevent large solids from entering pump and protect pool
cover.

NOTICE:

This unit is not designed for applications involving salt

water or brine! Use with salt water or brine will void warranty.

PERFORMANCE

INSTALLATION

Hazardous voltage. Can shock, burn or cause

death.

Do not use power cord to lift motor. Always use handle.

1. Pump should always stand upright on base when operating.

Do not suspend pump by means of discharge hose or
power cord. Keep pump inlet screen clear.

2. To install a garden hose, first install adapter provided with

pump.

NOTICE:

To keep friction as low as possible, hose must be

5/8" or larger. Keep hose as short as possible.

3. If, in your application, backflow is a problem when the

pump stops, prevent it by installing a 1” NPT check valve
in the pump discharge.

4. Power Supply: Pump is designed for 115V., 60 HZ. 

operation and requires an individual branch circuit of 
15 amperes or more capacity. It is supplied with a 3-wire
cord set with grounding-type, GFCI protected plug for use
in a 3-wire, grounded outlet. For safety, pump should
always be electrically grounded to a suitable electrical
ground such as a grounded water pipe or a properly
grounded metallic raceway or ground wire system. Do not
cut off the round grounding prong.

Risk of sudden starts. Can result in an elec-

trical shock or the pinching of hands or tools.

The pump

motor is equipped with automatic resetting thermal protec-
tor and may restart unexpectedly. Protector tripping is indi-
cation of motor overloading as a result of operating pump
at high pressure, excessively high or low voltage, inade-
quate wiring, incorrect motor connections, or a defective
motor or pump.

GPH (LPH) AT TOTAL FEET (M)

3'

5'

10'

15'

18'

20'

22'

(0.91)

(1.52)

(3.05)

(4.57)

(5.49)

(6.09)

(6.70)

1600 gal 1524 gal 1260 gal 924 gal

648 gal

372 gal

0 gal

(6 057 L) (5 769 L) (4 770 L) (3 498 L) (2 453 L) (1 408 L)

(0 L)

IMPORTANT SAFETY

INSTRUCTIONS

When installing and using this electrical equipment,
basic safety precautions should always be followed,
including the following:

READ AND FOLLOW

ALL INSTRUCTIONS

To reduce the risk of injury, do not

permit children to use this product

unless they are

closely supervised at all times.

Risk of Electric Shock.

Connect only

to a properly-grounded, grounding type receptacle.
The pump requires 115 volt, single phase current.
The pump is protected by a ground-fault circuit
interrupter (GFCI) built into the plug. Do not modify
the cord, plug, or GFCI.

Do not bury cord. Locate cord to minimize abuse
from lawn mowers, hedge trimmers, and other
equipment.

To reduce the risk of electric shock,

replace damaged cord immediately.

To reduce the risk of electric shock,

do

not use an extension cord to connect the unit to the
electrical supply; provide a properly located outlet.

SAVE THESE 

INSTRUCTIONS

Содержание 2115

















Отзывы: