Sime estelle, Руководство пользователя

Страница: 7 / 11

– complete the assembly by fixing the
lid (12) to the sides with pin clutches.
NOTE: Remove the “Testing
Certificate” from inside the combus-
tion chamber and keep together with
the instructions manual.
2.6 ELECTRICAL CONNECTION
The boiler is fitted with an electricity
cable, and requires a 1ph - 230V -
50Hz power supply through the main
switch protected by fuses. The room
thermostat (required for enhanced
room temperature control) should be
installed as shown in fig. 6.
Connect the burner with the cable
supplied.
NOTE: SIME declines all responsibility
for injury caused to persons due to
failure to earth the boiler.
2.6.1 Electrical connection
to the BA boiler unit
To connect the boiler to the boiler unit
proceed with the following operations:
28
KEY
TS Safety stat
TA
Room stat
TC Boiler stat
IG Main switch
PI C.H. pump
B Burner
SB Burner lock-out lamp
Fig. 6
10
12
4
9
8
5
7
6
3
2
1
11
Fig. 5