Sime 8115800, Руководство пользователя, Страница: 45 / 124

Installation, use and maintenance manual
MANUAL CODE: 6328406 Page 45 / 124
Fig. 13 – User interface
7.1.1
BUTTONS AND INTERFACE
7.1.1.1 On/Stand-by button
Use this button to:
 turn the product on (ON status);
 put the product in stand-by mode (in this
mode,
the appliance can operate
automatically according to specific time
settings and automatically activate the anti-
legionella and defrosting functions).
When the appliance is powered up, it
keeps the same status as when the power
supply was disconnected.
7.1.1.2 [SET] button
Use this button to:
 confirm a selection or value set.
7.1.1.3 [UP] button
Use this button to:
 scroll up through the list of parameters;
 increase the value of a parameter.
7.1.1.4 [DOWN] button
Use this button to:
 scroll down through the list of parameters;
 decrease the value of a parameter.
7.1.1.5 Interface display
The interface display (Fig. 14) shows the:
 control temperature;
 alarm/error codes;
 status notifications;
 operating parameters.
Fig. 14 – User interface display (mono-boiler model)
Compressor
LED
If it is on: the compressor is
active.
If it is flashing:

The compressor is in
the
process of
switching on.
 The operating setpoint is
being modified;
Defrosting LED If it is on: defrosting is in
progress
MF LED If it is on: the electrical resistor
on the boiler is active
Fan LED If it is on: the fan is active
Maintenance
LED If is on: the air filter requires
maintenance
Alarm LED If it is on: check the list of
alarms
and follow the
procedure indicated in this
manual
Degrees
Celsius LED If it is on: the unit of
measurement for temperature
is degrees Celsius
Degrees
Fahrenheit LED If it is on: the unit of
measurement for temperature
is degrees Fahrenheit.
On/Stand-by
LED If it is on: the device is in
stand-by mode.
If it is flashing: the appliance
has been switched on/off
manually while in automatic
timed on/off mode.
Not used
7.1.1.6 Warnings
Loc The keypad is locked (see section 7.1.3.3).
dEFr Defrosting is in progress. Other functions cannot
be activated.
Anti The Anti-legionella function is in operation.
ObSt The Overboost function is in operation.
ECO The Economy function is in operation.
Auto The Automatic function is in operation.
7.1.2
OPERATION
7.1.2.1 Operating modes
The appliance can operate in the following
modes:
On/Stand-by
button SET
button DOWN
button UP
button
Display