3
A E R O S T A T S E N T R Y
5 1 0 0 6 0 0 R e v . H
1. DESCRIPTION
The Sentry ionized air blower produces an air
fl
ow that is rich in positive and
negative ions. Directing the air
fl
ow on an object that has a static charge will
neutralize the charge. If the object has a positive static charge, it will draw
negative ions from the air
fl
ow. If the object has a negative static charge, it will
draw positive ions from the air
fl
ow. The ions are attracted to the oppositely
charged object and neutralize the charge on the object.
The Sentry uses a three-speed blower to produce a uniform air
fl
ow. The air is
drawn into the unit through slots. The air exits the blower and enters a duct,
which shapes and ionizes the air
fl
ow. The ionizer uses a transformer, which
produces high voltage AC. This transformer is inherently current limited for
safety. The transformer output also contains a current limiting resistor, which
provides redundant safety and enhances the ionization stability. The high voltage
AC is applied to a row of stainless steel ion emitters, which results in an intense
alternating electric
fi
eld at the tip of the emitters. It is this intense electric
fi
eld
that injects alternating polarity ions into the air
fl
ow. The shaped air
fl
ow exiting
the Sentry carries these ions over a broad area for static elimination.
The ionizer of the Sentry features a balancing circuit. The balancing circuit works
by isolating the transformer secondary from electrical ground. This results in the
equal production of positive and negative ions. The Sentry also features a built-in
emitter cleaner. Cleaning the emitters on a weekly basis prevents the buildup of
airborne debris to which all electrical ionizers are prone. This keeps your Sentry
working in top form for the life of the unit.
The Sentry is designed for use where static electricity creates problems. The
Sentry is particularly well suited to neutralize charges on three-dimensional
objects such as parts emerging from a molding process. It is also suitable for
neutralization over a large area such as plastic sheet fabrication and forming.
The Sentry blower is designed for superior performance:
•
Rapidly neutralizes static charges
•
Covers an extended area with ionized air
•
Three speed fan with wide range of air flow
•
Bench stand mount
•
Built-in emitter cleaner
•
Durable, electrically grounded steel enclosure
The Sentry is listed by UL and CUL (equivalent to CSA); the 230V Sentry is
marked CE. The system must be properly installed and maintained.