manualshive.com logo in svg

Simco-Ion AeroBar 5225S, Руководство пользователя

Поделиться
Скачать
Simco-Ion AeroBar 5225S Скачать руководство пользователя страница 46

19-5225S-M-01 Rev 2

42

Emitter Point Inspection

Emitter point maintenance ensures continued optimum 
performance. Dirty or eroded points may cause system failure and 
diminished ionization output. Dirt or erosion on emitter points can be 
cause by a number of environmental factors, including the presence 
of airborne molecular contaminants ("AMCs"). It is important to 
create an inspection schedule for emitter points. Schedules will vary 
depending on your environment.

Inspect emitter points for white fuzz or buildup on the tips, or tips 
that are blackened or broken. Clean any buildup following the 
procedures described below. 

Emitter Point Cleaning

Recommended Cleaning Materials:

• Cleanroom-compatible cloth swabs (polyester cloth is 

recommended) with a solution of 50% IPA (electronic-grade 
isopropyl alcohol)/50% de-ionized water.

• Simco-Ion Emitter Point Cleaner (Simco-Ion part number #22-

1000).

Caution:

Do not clean emitter points while the unit is powered. Doing so 
may result in additional contamination and possible shock. 
After powering down

 

the AeroBar, allow a minute for the high 

voltage power supplies to discharge.

Содержание AeroBar 5225S
































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды