SIMAG KCC23, Руководство по обслуживанию

Страница: 18 / 39

By rotating the control setting screw clockwise
the ice cube thickness can be increased; on the
contrary the thickness can be reduced by turning
the setting screw counterclockwise.
If the ice cubes are shallow and cloudy, it is
possible that the ice maker runs short of water
during the freezing cycle second phase or, the
quality of the supplied water requires the use of
an appropriate water filter or conditioner.
J. With the icemaker in the harvest cycle, hold
ice against the bin thermostat control bulb to test
its shut off (Fig.4). This should cause the ice
maker to shut OFF after 30 seconds, 1 minute at
the most, namely when the control bulb tempera-
ture drops to reach +1
°
C.
NOTE. In case this test is performed during
the freezing cycle, the unit will shut OFF only
at the end of the freeezing cycle and exactly
when the timer switch actuators drop-off into
the cam slot (Fig.5).
Within minutes after the ice is removed from the
sensing bulb, the bulb will warm up to reach +4
°
C
and consequently will cause the icemaker to
restart from the harvest (defrost) cycle.
K. Instruct the owner/user on the general
operation of the ice machine and about the
cleaning and care it requires.
Page 5