SVD 800 HD
30
Press or .
Select the right ratio from among: N
(Normal), S (Small), L (Letter box),
C (Cinema), W (Wide).
Press ENTER to confirm.
The following message will appear under the table: EDIT
ASPECT RATIO.
5.8.4 Horizontal and vertical
frequencies
The horizontal and vertical frequencies are measured by
the projector and stored in the relative memory bank each
time you store a change.
If the input signal does not match the frequency stored in
the memory bank the software will automatically recall
the memory bank with the frequency nearest to that of
the input signal, in this order: horizontal frequency, vertical
frequency, aspect ratio.
If the frequencies of the input signal are different from
those stored in the memory bank, the software will not
recognise the frequency and, if you store settings, it will
ask to create a new memory bank.
5.8.5 How to store a new input signal
Press MEMO only after the convergence adjustments
have been done, the following will appear:
Press ENTER and the following will appear:
Fig. 82
Enter the label;
see par. 5.8.2 page 29.
Press ENTER and the following will appear:
Fig. 83
Press ENTER. The menu will appear with the number of
the bank where it is stored.
Press ESC to exit.
5.8.6 LOAD
This item on the MEMORY MANAGER menu allows
the user to load and change a memory bank
containing all the projector adjustments.
This is possible only if there is a match between the input
frequencies and the frequencies stored in the memory
bank.
Press or . Select LOAD, ENTER
Press or . Select a memory bank whose frequencies
are like the current signal.
Fig. 84
Press ENTER.
The following message will appear under the table.
Fig. 85
- MEMORY MANAGER -
LOAD BANK
COPY
N
00
01
02
03
04
05
06
07
08
09
15.6
15.7
31.5
31.5
31.2
48.4
64.3
71.7
50
60
70
60
60
00
60
76
N
N
N
N
N
N
N
N
PAL
NTSC358
DOS-VGA
VGA-640
31K 10HZ
VESA 1024
64K 60HZ
UN 76HZ
HOR VER F LABEL
01
BANK
SIGNAL NAME
PAL
MOVE
DEL
LOAD
33.7
60
N
ATSC1080
44.9
60
N
ATSC720P
If the input signal frequencies (horizontal and vertical) do
not match the selected memory bank, the following
message will appear under the table.
Fig. 86
RECALL A BANK FROM MEMORY
Fig. 87
FREQUENCY MUST MATCH !
NEW INPUT SIGNAL
FH = XX.X KHZ
FV = XX HZ
CREATE MEMORY BANK?
NEW INPUT SIGNAL
FH = XX.X KHZ
FV = XX HZ
ENTER NAME =
–
– – – – – – –
NEW INPUT SIGNAL
ENTER NAME = XXXXXXXX
CONFIRM NEW NAME: XXXXXXXX
Содержание SVD 800 HD
Страница 44: ......