SVD 800 HD
12
3.15Input Settings
CLAMP POS
With this menu you can select the position of the CLAMP
impulse on the external video signal.
To position the black level of a picture correctly (if the
image brightness does not seem right), it might be
necessary to modify the position.
This can be done on AUTO or MANUAL.
CLAMP POS AUTO
Automatic setting mode. Usually set on this position.
Press ENTER.
Press or . Adjust to get the right picture, MEMO,
ENTER, EXIT.
TLV SYNC
With this menu you can synchronise signals with TRI-
LEVEL synchronism. Selection is active only with
horizontal frequency signals higher than 30 KHz.
Press or . Select TLV SYNC.
Press or . TLV SYNC ON appears.
Fig. 20
- VIDEO MENU -
- QSD MANAGER
- UPC MANAGER
- INPUT SETTINGS
- BLANKING
- EHT NOISE RED.
- WHITE MENU
Fig. 21
- INPUT SETTINGS -
CLAMP POS
TLV SYNC
AUTO
OFF
Press or . Select CLAMP POS MANUAL
- INPUT SETTINGS -
CLAMP POS
TLV SYNC
MANUAL 20
OFF
Fig. 22
- INPUT SETTINGS -
CLAMP POS
TLV SYNC
MANUAL 50
OFF
Fig. 23
Press MEMO, ENTER, EXIT.
3.16 Blanking
It eliminates the excess parts if the picture displayed is
bigger than the screen.
Press or . Select BLANKING
- VIDEO MENU -
- QSD MANAGER
- UPC MANAGER
- INPUT SETTINGS
- BLANKING
- EHT NOISE RED.
- WHITE MENU
Press ENTER. Select the part to adjust from LEFT, RIGHT,
UP, DOWN.
Press or to adjust LEFT, RIGHT.
Press or to adjust UP, DOWN.
Press MEMO, ENTER, EXIT.
Fig. 24
- LEFT SIDE -
CRT = R G B
VALUE = 0
BLANKING
Fig. 25
3.17 EHT NOISE RED
This function eliminates interference on the EHT generator
image (high voltage) with several horizontal and vertical
frequency combinations.
Press or . Select EHT NOISE RED, ENTER
- VIDEO MENU -
- QSD MANAGER
- UPC MANAGER
- INPUT SETTINGS
- BLANKING
- EHT NOISE RED.
- WHITE MENU
Fig. 26
Содержание SVD 800 HD
Страница 44: ......