Sim2 LUMIS 3D-S, Руководство пользователя

Страница: 6 / 42

Product disposal
The lamp inside this projector contains mercury and may be subject to
special disposal or recycle regulations. Dispose or recycle in accordance
with local laws. For more information contact the Electronic Industries
Alliance at
www.eiae.org or check www.lamprecycle.org
Notice
The appliance has been subjected to exhaustive operating tests by SIM2 to guarantee
the highest quality. The projector bulb life should thus initially be around 30-60 hours.
In addition to the customary checks, the Quality Control department also runs addi-
tional statistical tests before shipment. In such cases, the packaging may show signs of
having been opened, and the hours of lamp operation may prove to be higher than
those normally shown when only standard tests are performed.
As the optical system of the Lumis 3D-S is extremely compact and has the purpose of
developing very high brightness and contrast, it is possible that a small quantity of
light is visible outside of the projection area and will vary depending on the type of
lens used and the zoom and shift setup. This characteristic of the optical system is to
be deemed as normal. In order to reduce this effect SIM2 recommends that the area
surrounding the projection screen is as dark as possible.
The Lumis 3D-S is a three chip DLP projector and uses three high resolution DMD (red,
green, blue). These three DMD are precisely aligned through a high precision process
that reduces the alignment error to within the foreseen limits of tolerance. The max-
imum limits of misalignment are the following:
•
Screen Center: up to 0.7 pixels between each color
•
Screen Borders: up to 2 pixels between each color
These limits are perfectly normal for this optical system and will not be considered as
a malfunction of the product.
Note: One pixel corresponds to 10 thousandths of a millimeter on the DMD.
Important information Lumis 3D-S
User Guide
6