Sim2 LUMIS 3D-S, Руководство пользователя

Страница: 26 / 42

DynamicBlack
This function improves the level of black and increases the depth and the detail of the
image especially in parts with low and medium brightness. DynamicBlack regulates
light based on the informative content of the image being projected. Available settings
are Off , Video and Movie . Off is recommended when using test pattern for measure-
ment or calibration purposes.
PureMotion
Activates the motion estimation/motion compensation function, which suppresses
motion judder. Settings available are Off , Low , Medium , or High . Default setting is
Low .
Image
This menu section provides access to some advanced image settings. Adjustments not
available for a given input are not displayed in the menu. See Table 4.4 for details.
Table 4.4
Video
RGBS
YPrPb
RGB
Graphics HDMI 1/2
Aspect ● ● ● ●
Color Management ● ● ● ●
Gamma Correction ● ● ● ●
Over scan ● ● ●
Position ● ● ●
Frequency ● ●
Phase ● ●
Y/C Delay ●
Signal Range ●
1
Lamp Power ● ● ● ●
Notes:
1. when RGB or AVI infoframe missing or incomplete
Aspect
This adjustment changes the dimensions and aspect ratio (relationship between width
and height) of the displayed image. There are six default aspects available and three
user aspects (with user-settable parameters). You can select a different aspect for
each source: the selected aspect ratio will be automatically applied the next time the
relative source is displayed. You can also select the required aspect ratio from the re-
mote control by repeatedly pressing
or by pressing and one of the number
1 - 9 . The following aspects are available:
•
Normal projects the image occupying the full height of the screen while main-
taining the aspect ratio of the input signal. When the input signal aspect ratio
is 4:3, black vertical bands are displayed on the right and left of the picture.
•
Anamorphic correctly displays a 16:9 image with over scan.
4 Operation Lumis 3D-S
User Guide
26