Sim2 LUMIS 3D-S, Руководство пользователя

Страница: 30 / 42

3D Glasses
Selects the type of active shutter glasses you are using. Choose:
•
SIM2 (the default setting) when you are using the 3D glasses (103-S) and the
3D emitter (E103-S) provided with the projector
•
Universal if you are using the optional Xpand Universal glasses (X103) and
Xpand 3D emitter (AE110). For more information refer to “ Optional
Accessories ” on page 8 .
Important: Make sure the 3D glasses type is set correctly to achieve best synchroniza-
tion, stereo separation, and image quality.
Test Patterns
Enters internal test patterns, that are needed for installation or calibration purposes.
Press
▴
or
▾
on the remote control or on the projector keypad to cycle through the
test patterns. To exit test patterns press Esc on the remote control or on the projector
keypad.
Note: OSD menus are not available while test patterns are displayed.
Initial Settings
Resets most projector settings to their factory presets. The settings in the following
list are not reset:
•
Serial Number and Model name
•
Lamp Hours
•
User Memories (including Memories Names)
•
Source List (including Source Names)
•
Orientation
•
Zoom and Focus
•
Y/C Delay
•
Position
Note: Before performing this operation, a confirmation message appears. Press
▸
to
Confirm and continue with the reset or press
◂
to Cancel.
Menu
This menu section provides access to OSD adjustments.
Language
Selects the desired OSD language. The Lumis 3D-S can display the menus in English,
Italian, French, German, Spanish, Swedish, Portuguese, Russian and Simplified
Chinese.
Source List
Allows customization of the Input list. To change the status of an input:
1. highlight the input
2. use the
◂
and
▸
keys to Enable or Disable the input.
Disabled inputs are not shown in the input selection menu and cannot be selected via
keys
1 - 5 of the remote control.
Important: Active inputs are numbered according to their position in the list. Chan-
ging the status of an input modifies the numbers assigned to the inputs that follow
4 Operation Lumis 3D-S
User Guide
30