SIM1 XT-B, Быстрый старт

Страница: 7 / 16

c) set Cabinets/Effects
This menu gives the opportunity to add some
effects/cabinet simulation and make volume settings
to each bass included in the presets. This feature
allows you to connect the XT-B directly to the PA or to
a powered speaker, and use it as a stand alone pedal.
Go to the bass/bank you wish to adjust. Hold down all
3 switches at once for 3 seconds, and follow the
instructions on brackets, to make your settings.
1. Target Guit
1.1 Gain (adjust the volume of each target bass)
1.2 Bypass (set the bank in bypass mode)
2. IR Cabinets (add an Impulse Response Cabinet Emulation)
3. Overdrive
4.1 OD Status (activate the Overdrive)
4.2 OD Drive (set the Overdrive Percentage )
4.3 OD Level (set the Overdrive Volume)
4. Reverb
5.1 Rev Status (activate the Reverb)
5.2 Rev Level (set the Reverb Percentage )
5. Tone Control
6.1 Treble
6.2 Bass
6. Master Gain
7.1 Master Unbal (set the Volume of the Unbalanced Out.)
7.2 Master Bal (set the Volume of the Unbalanced Output)
Fig. 1
bypass
Hold Up + Down Enter Menu
Settings
Bank
Number
Down
to Enter
Up to
Scroll up
Bypass
to Esc