Silverwing AEROPRAKT A22 FOXBAT, Руководство пользователя

Страница: 90 / 185

Page 91 - © SilverWing Aviation, 2005
PAGE THIRTY-SIX
DRAWING NUMBER 12.O50
Installing the Elevator Rods
SEE DRAWING FOR PARTS REQUIRED
Recommended job for one person with fuselage monocoque supported as
required
1. Locate and inspect the elevator rods as illustrated on the drawing.
Select the correct size bolts, castle-nuts, washers and cotter pins.
Note.
The rod (2) on this drawing is the same part as the rod (4) on drawing
number 12.040 (see page twenty eight). Refer to that drawing for view
of forward rod connection.
2. Offer up the parts and assemble them loosely exactly as illustrated on
the drawings.
3. Re-check 1 and 2.
4. Tighten the nuts and install the cotter pins (don’t over-tighten). Ensure
free rotation at each rod-to-bellcrank connection and at both bellcrank
pivots.
5. Thoroughly examine the finished work.
Notes: