Silverton 42 C, Руководство пользователя

Страница: 126 / 210

42C System Operations - 68
Maintenance of the Trim Tab System is
as follows:
Silverton recommends painting the trim
tabs with good quality, antifouling bottom
paint. DO NOT paint any hinges or the
moving parts of the cylinders.
To reduce the risk of electrolysis and
galvanic corrosion, Silverton recommends
the installation of sacri
fi cial zinc anodes
on the trim tab plates at least once a year,
preferably during preparation for spring
launch. DO NOT paint the sacri
fi cial zinc
anodes.
Periodically examine the trim tabs for
accumulation of underwater growth and
clean as necessary.
Periodically examine the trim tab pump
and hydraulic lines, which are located in
the bilge area, for leaks (Refer to the Me-
chanical Schematic in the Schematic Sec-
tion of this Owner’s Manual for the location
of the trim tab pump). Tighten connections
if leaks are noted. If the hydraulic lines ap-
pear worn or chafed, contact your Silver-
ton Dealer for inspection and replacement,
if necessary. The photo below shows the
trim tab pump.
Refer to the BENNETT TRIM TAB Man-
ual included with your Owner’s Packet
for technical information concerning the
operation and maintenance of the trim tab
system.