Silverton 38 CONVERTIBLE, Руководство пользователя

Страница: 74 / 220

SYSTEM OPERATIONS-18
115 Volt Switches
The following breaker switches and their
function are described below in the order
in which they appear on the main electri-
cal distribution panel:
AC Amperage Gauge and Switch: The
gauge displays the amperage draw on the
AC circuit. The gauge reads the amper-
age, and the switch below it selects which
line the gauge will display. Line 1 is the
power and switches on the left side of the
AC Portion of the AC/DC Panel and Line
2 controls the power and switches on the
right side of the AC portion of the AC/DC
Panel.
AC Volt Gauge and Switch: The gauge
displays the voltage draw on the AC cir-
cuit. The gauge reads the voltage, and the
switch below it selects the line the gauge
will display. Line 1 is the power and the
switches on the left side of the AC por-
tion of the AC/DC Panel and Line 2 is the
power and switches on the right hand side
of the AC Portion of the AC/DC Panel.
Generator Blower and Start/Stop
Switch:
This is the “ON/OFF” switch for
the generator. The generator is an option
that was available with your 38C. Below
the “ON/OFF” switch is the Generator
Blower Switch.
The blower must be run for fi ve (5) min-
utes before starting the generator.
SHORE POWER / GENERATOR
SWITCH:
This switch selects where you will be
getting your AC Power from. The slide
bar is there to make sure you only select
one source at any one time. In order for
the three (3) generator switches to be on,
the slide bar has to move over to block
the three (3) Shore Power Switches from
being on. In order for the Three (3) Shore
Power switches to be on, the Slide Bar
must move over to block the three (3)
Generator Switches from being on.
Converter: Supplies power to the convert-
er, which converts AC power to DC power.
Forward Outlets: Supplies power to the
outlets in the forward cabin and forward
head.
Microwave: Supplies power to the micro-
wave oven outlet.
Refrigerator: Supplies power to the refrig-
erator in the Galley.
Salon Air Conditioner: Supplies power
to the salon air conditioner. Air pump must
be “ON” before unit is turned “ON”.
Salon Outlets: Supplies power to the
outlets in the Salon.
Spare: Supplies power to additional AC
accessories.