SilverStone ST55F-G, Быстрый старт

Страница: 5 / 12

03
Maximum continuous total DC output power should not exceed750W.
Maximum continuous combined load on +3.3VDC and +5VDC outputs shall not exceed 120W.
Maximum combined load on +12V outputs shall not exceed 750W.
NOTE:
Noise test should be measured with 20 MHz bandwidth frequency oscilloscope. The output terminal
shall add a tantalum capacitor of 10uF in parallel with a ceramic capacitor of 0.1uF.
Maximum continuous total DC output power should not exceed650W.
Maximum continuous combined load on +3.3VDC and +5VDC outputs shall not exceed 120W.
Maximum combined load on +12V outputs shall not exceed 650W.
NOTE:
Noise test should be measured with 20 MHz bandwidth frequency oscilloscope. The output terminal
shall add a tantalum capacitor of 10uF in parallel with a ceramic capacitor of 0.1uF.
ST65F-G
Output Voltage
+5V
+12V
–12V
+5Vs
+3.3V
Load MIN
0.0A
0.0A
0.0A
0.0A
0.0A
Range MAX
22A
54.2A
0.3A
3.0A
22.0A
Regulation
±5%
±5%
±10%
±5%
±5%
Ripple & Noise P-P Max.
50mV
120mV
120mV
50mV
50mV
Maximum continuous total DC output power should not exceed550W.
Maximum continuous combined load on +3.3VDC and +5VDC outputs shall not exceed 105W.
Maximum combined load on +12V outputs shall not exceed 550W.
NOTE:
Noise test should be measured with 20 MHz bandwidth frequency oscilloscope. The output terminal
shall add a tantalum capacitor of 10uF in parallel with a ceramic capacitor of 0.1uF.
ST55F-G
Output Voltage
+5V
+12V
–12V
+5Vs
+3.3V
Load MIN
0.0A
0.0A
0.0A
0.0A
0.0A
Range MAX
20A
45.9A
0.3A
3.0A
20.0A
Regulation
±5%
±5%
±10%
±5%
±5%
Ripple & Noise P-P Max.
50mV
120mV
120mV
50mV
50mV