Silverline RS5322B01, Руководство пользователя

Страница: 57 / 108

IMPORTANT:
always disconnect the appliance from the gas and electricity mains before carrying out
any cleaning operation.
HOT PLATE
Periodically wash the hot plate, the enamelled stell pan support, the enamelled burner
caps "C" and the burner heads "T" (see fig. 6) with lukewarm soapy water. The ignition
elements “AC” and safety cut
- off sensors “TC” must be cleaned. They should not be put
in the dishwasher.
Following this, all parts should be thoroughly rinsed and dried. Never wash them while
they are still
warm and never use abrasive powders.
Do not allow vinegar, coffee, milk, salted water, lemon or tomato juice from remaining
in contact with the enamelled surfaces for long periods of time.
WARNINGS:
comply with the following instructions, before remounting the parts:
•
Check that burner head "T" (fig. 6) slots have not become clogged by foreign
bodies.
•
Check that enamelled burner cap "C" (fig. 6) have correctly positioned on the
burner head. It must be steady.
•
The exact position of the pan support is established by the rounded corners,
which should be set towards the side edge of the hot plate.
• Do not force the taps if they are difficult open or close. Contact the technical
assistance service for repairs.
• Don't use steam jets for the equipment cleaning.
54