Silverline RS5322B01, Руководство пользователя

Страница: 46 / 108

•
Install an omnipolar circuit - breaker between the appliance and the electricity
main. This circuit - breaker should be sized according to the load rating of the
appliance and possess a minimum 3 mm gap between its contacts.
• Remember that the earth wire must not be interrupted by the circuit - breaker.
•
The electrical connection may also be protected by a high sensitivity differential
circuit
- breaker.
You are strongly advised to fix the relative yellow - green earth wire to an efficient
earthing system.
Before performing any service on the electrical part of the appliance, it must absolutely
be disconnected from the electrical network.
If the installation requires modifications to the home's electrical system or if the
socket is incompatible with the appliance's plug, have changes or replacements
performed by professionally
- qualified person. In particular, this person must also
make sure that the section of the wires of the socket is suitable for the power
absorbed by the appliance.
WARNINGS:
All our appliances are designed and manufactured in compliance with European
standards EN 60 335 - 1, EN 60 335 - 2 - 6 and EN 60 335 - 2 - 102 plus the relative
amendments. The appliance complies with the provisions of the following EEC
Directives:
- CEE 2004/108/CE regarding to electromagnetic compatibility.
- CEE 2006/95 regarding electrical safety.
43