11
Installation and Assembly
n
Parts inside the appliance may have sharp edges. Use protec-
tive equipment.
CAUTION!
–
The furniture that the appliance will be
mounted on should be resistant to 90°C tem-
perature.
–
The durability of the furniture that will be
mounted on should also be ensured after the
cutting operations have been completed.
–
Particularly in thin plates the carrying capacity
and durability should be provided with suitable
support parts. Consider the weight of the appli-
ance by including additional loads. The rein-
forcing material used should be heat and mois-
ture resistant. The weight of the appliance is
specified in the label on the package.
–
Clean the sawdust after cutting. Cover the cut
surfaces so that they are heat resistant and
waterproof.
–
The cross-sectional surface angle to the
working plate should be 90°.
Counter Cutting Dimensions for Installation and Using Sili-
cone
Consider the specified safety distances for bench dimensions
n
The distance between the appliance and the back and front of
the cabinet should be 50 mm minimum.
n
A minimum distance of 300 mm must be left from the right and
left sides of the appliance.
n
Bench depth should be 600 mm minimum.
* It is also suitable for use of 100 mm depending on the ventilation
ducts to be used.
Fig. 12
100*
Fig. 13
Installation and Assembly
11.02.2021
FLOW-IN PRO USER MANUAL EN
25