Silvercrest SWKE 3100 C1, Инструкция по эксплуатации и правила безопасности

Страница: 34 / 130

SilverCrest SWKE 3100 C1
32 - English
8.2 Cleaning the limescale filter (1)
A limescale filter (1) is installed in the kettle (4). You should clean the limescale filter from time to
time. Proceed as follows to clean the limescale filter (1):
•
Remove the cooled down
kettle
(4) from the base (5).
•
Open the lid (10) by pressing the lid release button (9).
•
Reach carefully into the
kettle
(4) with
your hand, grasp the catch of the
limescale filter (1) at the upper end.
Press the catch downwards, tilt the
limescale filter (1) inwards and remove
it.
•
Place the limescale filter (1) in a warm
descaling solution for household
appliances (such as for coffee
machines) for several hours and then
rinse it thoroughly with clear water.
•
Replace the limescale filter (1) by firstly
inserting the lower end into the T -
shaped recess at the bottom of the
spout. Now tilt the compressed catch of
the limescale filter (1) towards the spout
until it snaps into place.
•
Close the lid (10) by pressing it down.
8.3 Storing the device when not in use
If the kettle will not be used for a longer period of time, store it in a clean and dry place.
•
Let the
kettle
(4) cool down fully before you store it.
•
Wrap the power cable (6) around the cable rewind under the base (5) and store the kettle in a
safe, dust-free place.