
SilverCrest SWKE 3100 C1
30 - English
Cable rewind
An integrated cable rewind is located on
the underside of the base (5). You can
adapt the length of the power cable (6) to
the conditions at the location in which you
are using the kettle.
You can minimise the length of the cable
when you are not using the kettle.
•
Unwind the power cable (6) on the underside of the base (5).
•
Place the base (5) on a flat, non-slip and dry surface. Make sure that the power cable (6)
passes through the opening on the underside of the base (5). This is to ensure that the kettle is
positioned securely.
WARNING
If the power cable (6) does not pass through the opening on the underside of
the base (5), the base (5) and kettle (4) are not positioned securely. The
movement of the boiling water can make the kettle tip over and cause serious
damage to property and cause injuries!
•
Open the lid (10) by pressing the lid release button (9).
•
Fill the
kettle
(4) with drinking water up to a minimum of ‘0.5 l MIN’ and a maximum of ‘1.7 l
MAX’ on the water level gauge (3) and close the lid (10) by pressing it down.
You can freely rotate the kettle (4) by 360° around its vertical axis when you
place it on the base (5). The kettle does not need to be locked into a particular
position. This way, you can turn the kettle (4) so that the water level gauge (3)
is easy to see or to direct the steam from the kettle away from you.
•
Plug the connector into a power socket, which is always easily accessible.
•
Place the
kettle
(4) on the base (5) and press the ON/OFF switch (7) down in order to switch
on the
kettle
(4). The ON/OFF switch (7) integrated into the status display lights up white. The
kettle makes noise during the heating process. This is not due to a malfunction.
DANGER of burn injuries
Turn the kettle (4) so that the steam is directed away from you. Otherwise you
could burn yourself.
Only boil water with the closed lid (10) on. Otherwise the kettle (4) can tip
over and cause burn injuries and damage to property.
•
As soon as the water boils, the
kettle
(4) switches off. The ON/OFF switch (7) automatically
returns to the upper position and the integrated status display goes out.
•
Pull out the power cable (6) plug from the socket, remove the
kettle
(4) from the base (5) and
pour out the water.
Содержание SWKE 3100 C1
Страница 1: ......
Страница 2: ......
Страница 3: ...V 1 2 Deutsch 2 English 20 Français 37 Nederlands 58 Polski 76 Česky 94 Slovenčina 111 ...