SilverCrest STWT 720 A1
English - 9
DANGER!
Please make sure that
the device is checked prior to use. Never use a faulty or damaged device,
the receiver is never touched with wet hands; there is a risk of electric shock,
the receiver is disconnected from the mains network prior to cleaning, otherwise there is a risk of
electric shock,
the receiver is never immersed in water; there is a risk of electric shock,
the receiver is protected from dripping or splashing water,
there are no naked flames (for example, burning candles) placed on or near the device.
DANGER! Operational safety
Only connect the receiver to a freely accessible power socket so that it can be quickly disconnected
from the mains in the event of danger (smoke, smell of burning). The power socket must be easily
accessible at all times, also during operation.
As soon as the receiver is connected to the mains network, it starts receiving power. Even when the
device is not in use, it consumes minimal power. Disconnect the receiver from the mains network if the
device is not being used for prolonged periods. This minimises the risk of a fire or smouldering, which
always exists when an electrical device is connected to the mains network. To fully disconnect the
receiver from the mains network, the plug must be pulled from the power socket.
Do not use any adapter plugs or extension cables that are damaged or do not meet the relevant
safety standards.
Never open the housing of the receiver. There is a danger of death due to risk of electric shock when
the housing is open.
The receiver must never be covered, as this poses a fire hazard caused by overheating,
