13
GB
6.7 Application areas of the
multifunction accessories
Preparing food:
•
Rinse or wash the food.
•
Cut the food up into smaller pieces.
•
Remove the outer shell from nuts. You
may use the inner skin if you wish, e.g.
with almonds.
•
Use fresh herbs without stems and in a
dry condition.
•
Remove sinews, bones and gristle from
the meat.
Blade assembly
The blade assembly
|
14
is ideal for chop-
ping meat, Parmesan, vegetables, fruit, nuts
and herbs.
1. Fill the food into the container
|
15
and
close it with the drive cover
|
8
.
2. Place the motor unit
|
1
onto the drive
cover
|
8
until it engages.
3. Connect the mains plug
|
3
with the wall
socket.
4. Press the controller
|
2
to switch the de-
vice on and release it to switch off.
5. After chopping remove the mains
plug
|
3
and remove the motor unit
|
1
from the drive cover
|
8
.
6.
Figure H:
press the button
|
16
and
turn the drive cover
|
8
anticlockwise to
open the container
|
15
. Lift the drive
cover
|
8
off, when the marking
|
31
at
the handle
|
17
points to the attachment
marking
|
32
.
7. Clean the device immediately if possible.
Slicing insert and grating disk /
dicer attachment
The slicing insert/grating disk
|
20
is used to
cut or grate raw fruit and vegetables such as
cucumbers, onions, mushrooms, apples, car-
rots, radishes, potatoes, courgette and cab-
bage.
The dicer, consisting of the blade assem-
bly
|
11
and disk insert
|
12
, is suited to dice
raw fruit and vegetables such as onions, ap-
ples, carrots, potatoes and courgette.
1. Close the container
|
15
with the drive
cover
|
8
(see “Multifunction drive cover”
on page 9).
2. Place the motor unit
|
1
onto the drive
cover
|
8
until it engages.
3. Connect the mains plug
|
3
with the wall
socket.
4. Press the controller
|
2
to switch the de-
vice on.
5. Fill food into the refill opening
|
9
. If nec-
essary, use the food pusher
|
7
to careful-
ly push the food down.
6. When you are finished, let go of the
controller
|
2
.
7. After cutting, grating or dicing pull out the
mains plug
|
3
and remove the motor unit
|
1
from the drive cover
|
8
.
8.
Figure H:
press the button
|
16
and
turn the drive cover
|
8
anticlockwise to
open the container
|
15
. Lift the drive
cover
|
8
off, when the marking
|
31
at
the handle
|
17
points to the attachment
marking
|
32
.
9. Clean the device immediately if possible.
Содержание SSMM 600 A1
Страница 2: ...English 2 Deutsch 22 ...