Silvercrest SPDP 18 A1, Руководство пользователя

Страница: 42 / 165

■ 32
│
GB│IE
SPDP 18 A1
Switching the screen on/off
During audio playback, you can separately switch the screen on the
DVD player
A and the second monitor B on or off . The sound will
still be transmitted .
♦ Press the DISPLAY ON/OFF button
3&
to switch the DVD player A
screen on or off .
♦ Press the TFT OFF button
3)
to switch the screen on the second
monitor B on or off .
Inserting/connecting a data medium
Inserting a DVD/CD
♦ Slide the disc compartment release OPEN
q
on top of the
DVD player A to the left and fold the screen
2!
forward to open
the disc tray .
♦ Insert the DVD/CD so that the label side is facing up and press it
carefully onto the retaining hub in the middle until the DVD/CD
clicks into place .
♦ To close the disc compartment, gently push the screen
2!
back until
you hear it click into place .
DVD/CD playback normally starts automatically after a few seconds .
You may need to press the
PLAY/PAUSE button
4%
or a menu
may appear asking you to make a selection using the navigation keys
5*
.
Connecting a USB flash drive
You can connect a USB flash drive to the USB port
t
to play audio,
video, or image files .
CAUTION
► To avoid damaging the device, do not use a USB extension
cable and do not connect the device directly to the USB port of
a computer .
► The USB port is designed for use with USB flash drives only .
Other external storage media, such as external hard drives,
cannot be operated via the USB port .
♦ Insert a USB flash drive into the USB port
t
on the right side of
the DVD player A to play files from the USB flash drive .
Connecting SD/MMC memory cards
You can insert an SD/MMC memory card into the memory card slot
y
to play back audio, video, or image files .
♦ Insert the memory card into the memory card slot
y
on the right
side of the DVD player A with the contacts to the rear and the
bevelled corner at the top .
Selecting the playback source
The default playback source of the device is DVD . If other media (USB
flash drive or SD/MMC memory card) are inserted, you can switch
between the playback sources .
♦ Press the SOURCE button
3*
repeatedly to switch between the
playback sources (DVD, USB and SD) . When the DVD drive is
selected as the playback source, "DVD" or "CD" is displayed at the
top left of the screen after the data is read .
Adjusting the volume/muting
The main volume control
o
, which controls the overall volume of the
AV OUT socket
u
, the headphone jack
i
and the speaker
2)
, is
located on the side of the DVD player A . If the main volume con-
trol
o
is set to minimum, no sound will be emitted or transmitted to the
second monitor B .
♦ Set the main volume control
o
to maximum to maintain the full
volume range of the device .
♦ Then adjust the volume using the VOL
4#
and VOL
4$
buttons on the remote control C or directly on the device with the
VOL
f
and VOL
g
buttons . Changing the volume on the
DVD player A also affects the volume on the second monitor B .
♦ To adjust the volume of the second monitor B separately,
use either the volume control
3#
or the VOL
2^
and
VOL
2&
buttons .
NOTE
► Press the VOL (
f
,
4#
) button to adjust the volume of the DVD
player A up to "16" . A message will appear to warn you of
possible hearing damage at high volume . You cannot increase
the volume up to "20" until you have confirmed this message
with the
ENTER button
5^
or the OK button
h
.
♦ Press MUTE button
4&
to mute the sound on the DVD player A
and the second monitor B .
♦ Press the MUTE button
4&
again to cancel the mute function .