Silvercrest SMW 800 A2, Руководство по эксплуатации

Страница: 10 / 72

- 8 -
Preparing the appliance
• Remove all packaging materials and any
protective film on the surface of the housing.
DO NOT remove the light grey flim-
mer cover plate, which is mounted
in the cooking area to protect the
magnetron.
• Insert the plug into a power socket.
Use a 230 - 240 V ~, 50 Hz, mains power
socket with a 16A fuse. It is recommended that
the microwave oven is powered from its own
ring main. If you are unsure about how to con-
nect the microwave oven, consult a specialist.
Before the first regular usage of the microwave oven
the appliance must be heated up to remove any
remaining production residues.
Without foodstuffs or accessories (glass plate
3
, star
roller
4
and grill stand
t
), switch the appliance on
in the mode Grill:
• Press the button Grill once
6
.
With this you select the Grill operation.
In the display
1
appears the symbol and
the symbol blinks. This indicates readiness
to start.
• Adjust the control dial
q
to a cooking time of
10 minutes.
• Press the button Start/Quick start
q
to
start the grilling process.
Notice!
On the first usage, the generation of light smoke and
a slight smell can occur, this is due to the production
residues. This is unharmful. Provide for sufficient
ventilation. For example, open a window.
• After 10 minutes, the appliance switches itself
off automatically. Signal tones sound. Open the
door. Wait until it has cooled down completely.
• Remove the plug from the mains power socket
then, after cleaning the appliance with a moist
cloth, dry it carefully.
Inserting accessories
• Place the star rotator
4
centrally on the drive
shaft in the cooking area. Ensure that it slides
completely onto the axle and is firmly seated.
• Place the glass plate
3
centrally on the star
rotator. The three rollers must be seated on the
leading edge on the glass plate
3
.
Operation
Setting the Clock
When you take the microwave oven into use for the
first time, or there has been a power cut, the display
1
indicates "1 : 0 1".
1. Press the button Clock
9
. "Hr 12" appears
in the display
1
.Press the button Clock
9
once again should you wish to switch to the 24-
hour mode.
2. By turning the control dial
q
programme in the
current hour. The clock symbol in the di-
splay
1
blinks.
3. Press button Start/Quick Start
q
. The
minute indicator appears.
4. By turning the control dial
q
, programme in the
current minute.
5. When the clock is correctly set, press the Start/
Quick Start button
q
. The clock symbol
in the display
1
glows continuously and
the colon indicates, by blinking, that the clock is
running.
IB_74208_SMW 800 A2_LB7.qxp 24.05.2012 14:38 Uhr Seite 8