SilverCrest SLXL 30 C1
English - 29
•
Now, start playback on your Bluetooth
®
device. Playback occurs via the connected speaker,
during which the power/charging LED (15) slowly flashes blue.
•
Hold down the on/off button (1) for approximately 3 seconds to end the Bluetooth
®
connection. A series of beeps will sound and the power/charging LED (15) will switch off.
9.2.1 Connect speaker to another Bluetooth
®
device
To connect the currently connected speaker to another Bluetooth
®
device, the existing connection
must first be disconnected by pressing the (5) button. Alternatively, you can disable the Bluetooth
®
feature on the currently connected Bluetooth
®
device.
A beep will sound and the power/charging LED (15) will flash blue rapidly. Pairing mode is now
active and the speaker can be connected to another Bluetooth
®
device.
9.2.2 Automatic connection when switching on
The speaker automatically connects to the last connected Bluetooth
®
device when switched on.
If this is not the case, you will need to connect manually. Please consult the operating instructions of
your Bluetooth
®
device.
9.3 TWS mode
By purchasing a second speaker of the same type (SLXL 30 C1), it is possible to pair both speakers
and use them as a stereo speaker system. A second speaker can be purchased at
www.lidl.de/de/onlineshop [in German].
TWS
: ‘
T
rue
W
ireless
S
tereo’.
This function allows two speakers to be coupled.
The left speaker acts as the main speaker, which is connected to a Bluetooth
®
device . It
transmits the audio signals it receives to the second (right) speaker.
9.3.1 Activate TWS mode
•
Switch on the speaker that should act as the main speaker. Establish the Bluetooth
®
connection to
your smartphone with this speaker.
•
Now, switch on the second speaker.
•
Press the (6) button on the main speaker. A beep will sound and the TWS LED (14) will flash
green rapidly for approximately 30 seconds, which indicates the speaker is in TWS pairing
mode.
•
Now, briefly press the (6) button on the second speaker while the TWS LED on the main
speaker is still flashing green. A beep will sound and the TWS LED (14) will flash green rapidly
for approximately 30 seconds, which indicates the speaker is in TWS pairing mode.
Two speakers can only be paired with TWS pairing if TWS pairing mode is activated on
both speakers.
•
A beep indicates the coupling was successful. TWS mode is now active. Playback will now occur
through both speakers.
