SFPW 360 B1
■
48
│
GB
│
IE
Charging USB devices
To use the USB port
3
, the mains adapter
1
must be connected.
CAUTION
►
Make sure that the power consumption of the
USB device does not exceed 800 mA. For more
information, refer to the operating instructions of
your USB device.
♦
Connect your USB device to the USB port
3
to recharge it.
♦
Disconnect your USB device from the USB port
3
when it is fully charged.
Troubleshooting
Synchronisation with DCF signal not possible
■
Disruptive obstacles or other interference sources
such as concrete walls or other radio transmission
appliances are interfering with DCF signal
reception.
Change the installation location (e.g. near a
window) and try again.
Connected USB device is not charging.
■
The radio-controlled projection alarm clock is not
connected to the mains.
Connect the mains adapter
1
to the radio-
controlled projection alarm clock.
■
No plug connection to the USB device.
Check the plug connection.
■
The power consumption of the connected USB
device is too high (> 800 mA).
The USB device cannot be charged.