Silvercrest SEK 2000 A1, Инструкция по эксплуатации и технике безопасности

Страница: 11 / 31

GB/IE/NI 12
Q
Batteries must be kept out of
reach of children. Children
could put batteries in their
mouths and swallow them. If a
battery has been swallowed,
immediate medical attention
must be sought.
Q
Different types of batteries or
rechargeable batteries must
not be mixed.
Q
Always insert batteries with the
correct polarity, otherwise they
might burst.
Q
Remove the batteries from the
appliance if you will not be
using it for a long time.

Preparation for assembly
Remove all packaging materials and transport
locks from the appliance.
Check the items delivered for completeness and
damage.
In order to find a suitable location for wall mounting,
please observe the following information:
1. Mount the appliance at a minimum height of 30
cm with a sufficient distance from the ceiling of a
minimum of 100 cm. To ensure the best possible
heat distribution, however, we recommend a height
of 60 cm.
2. Make sure that the long mounting plate
5
is only
mounted horizontally on the wall.
3. Observe the dimensions of the product in the
section: “Technical data”.

Assembly
Note:
Read the operating and safety information of
your drill carefully before beginning assembly!
To fix the long mounting plate
5
to the wall,
you need 4 holes at a distance of 110 mm
each. (see Fig. 1)
Drill 4 holes, 8 mm diameter and 26 mm deep to
use the dowels
10
and screws
9
supplied.
Place the dowels
10
in the holes once you have
cleared them of debris.
Now fasten the long mounting plate
5
to the wall
using the screws
9
.
Place the Curved electric built-in fire on the
long mounting plate
5
by connecting the metal
plate to the back of the appliance with the long
mounting plate
5
(see Fig. 2). Make sure that
the metal plate is completely fitted onto the long
mounting plate
5
.
1
2