Silvercrest SBSB 750 A1, Инструкции по эксплуатации и безопасности

Страница: 36 / 50

36 GB/MT
Parking holder for taking
breaks or storage
During short work breaks you can park the tel-
escopic wand
4
on the vacuum cleaner
1
using the floor brush
8
. To do so, insert the
suction attachment into the parking holder
using the parking cam (see Fig. E
I
).
After use, position the vacuum cleaner
1
up-
right. Then insert the suction attachment (floor
brush
8
) downwards into the parking holder
using the park cam (see Fig. E
II
). It is helpful
to slide the sections within the telescopic wand
4
completely into one another. This allows
you to easily carry the product or to park it for
storage.
Cleaning
DANGER OF
ELECTRIC SHOCK!
Always switch
off the product before cleaning or
maintaining it and unplug the mains
plug from the mains socket.
DANGER OF
ELECTRIC SHOCK! Never immerse
the product in water.
DANGER OF
ELECTRIC SHOCK!
Do not allow
water to enter the housing.
Do not use aggressive cleaning
agents, brushes with metal or ny-
lon bristles, or sharp and metal
cleaning objects such as knifes,
hard spatulas or similar. Doing so
may result in property damage.
Never put the product in the
dishwasher. This would break
the product.
Changing / cleaning
the dust bag
Note: The dust bag must be changed as soon as
the control light
15
lights up red.
Note: The control light
15
will also light up red if
the suction nozzle, the telescopic wand
4
or the
hose
2
are clogged. If this happens, switch off the
product and remove the foreign objects.
Using the supplied cloth bag:
Press the release handle
19
to open the lid of
the dust bag compartment (see Fig. F).
Remove the cloth bag
6
by pulling the rigid
plastic part of the cloth bag
6
out of the dust
bag holder
20
(see Fig. G).
Empty the cloth bag
6
.
If necessary, clean the cloth bag
6
with water
and a neutral washing detergent.
If you have washed the cloth bag
6
, ensure
that it is completely dry before inserting it back
into the product. When inserting it, ensure that
the cloth bag
6
does not become clamped.
Slide the rigid plastic part of the textile bag
6
into the dust bag holder
20
.
Close the lid of the dust bag compartment until
it clicks into place audibly.
Using other paper bags you have
purchased:
Press the release handle
19
to open the lid of
the dust bag compartment (see Fig. F).
Remove the paper bag by pulling the rigid
holder on the paper bag out of the dust bag
holder
20
(see Fig. G).
Dispose of the paper bag.
Slide the rigid holder of a new paper bag into
the dust bag holder
20
. When inserting it, en-
sure that the paper bag does not become
clamped.