Silvercrest SBDB 5 A1, Инструкция по эксплуатации и правила безопасности

Страница: 58 / 106

GB
│
MT
│ 55 ■
SBDB 5 A1
♦ Connect the external playback device to the 3 .5 mm jack cable
t
in the
AUX IN
compartment
z
of the radio .
♦ Briefly press the button
2
to switch on the radio .
♦ If necessary, briefly press the SOURCE / button
4
several times until
Auxiliary Input
appears on the display 1 .
♦ Turn on the external playback device and start playback .
♦ Afterwards, set the desired volume using the
VOLUME
dial
5
on the radio .
Alternatively, you can increase the volume on the external playback device .
♦ You can now stow the external playback device in the AUX IN compart­
ment
z
(if it fits) . If necessary, close the AUX IN compartment
z
again
by turning the three catches u of the AUX IN compartment z clockwise
to the locking position . Note also the labels OPEN and CLOSE with the
corresponding arrows on the catches
u
of the AUX IN compartment
z
.
♦ To stop AUX operation, turn off the radio and the external playback device .
Disconnect the external playback device from the 3 .5 mm jack cable
t of
the radio . Alternatively, you can press the SOURCE / button
4
to switch
directly from AUX mode to radio mode or
Bluetooth
®
mode .
Alarm times
The device has two alarm functions, Alarm1 and Alarm2 , both of which can be
programmed to play the last radio station you listened to or to sound an alarm at
a specific time .
Setting the alarm
♦ Press the
INFO / MENU
button
0
for about 2 seconds to call up the
settings menu . Alarms is shown as the first menu option on the display
1
.
♦
Press the
ENTER / SCAN button
3
to confirm the selection .
♦ Press the TUNE+ 9 or TUNE− button 8 select either
Alarm1
or
Alarm2
.
♦ Press the ENTER / SCAN button
3
to confirm the selection .
The display
1
now shows the message Alarm detail .
♦ Press the ENTER / SCAN button
3
to set the alarm to On .
♦ Press the TUNE+ button
9
to go next to the setting of the alarm time .
♦ Press the ENTER / SCAN button
3
to set the alarm time . Set alarm
time appears on the display
1
and the hour display flashes .
♦ Press the TUNE+ 9 or TUNE− button 8 to set the hours .
♦ Press the ENTER / SCAN button
3
to confirm the entry .
The minutes flash on the display
1
.
♦ Press the TUNE+
9
or TUNE− button
8
to set the minutes .
♦ Press the ENTER / SCAN button
3
to confirm the entry .