Silvercrest SBDB 5 A1, Инструкция по эксплуатации и правила безопасности

Страница: 50 / 106

GB
│
MT
│ 47 ■
SBDB 5 A1
Connecting the power supply
CAUTION
► Before connecting the device, compare the connection data on the
nameplate of the mains adapter (voltage and frequency) with those of your
mains supply . This data must agree so that the device is not damaged .
♦ Connect the supplied mains adapter to the mains adapter connection r
and to a mains socket . The device is now in standby mode .
Inserting batteries
NOTE
► The device can be operated either with batteries or via the mains power
connection .
► Use 6 x 1 .5 V type C/Baby/LR14 batteries (not supplied) for battery
operation .
► When the battery level is low, you will hear a beep and the display
1
shows Battery low .
1 . Open the battery compartment
e
on the rear of the device by turning
the two catches
w
of the battery compartment
e
anticlockwise until the
battery compartment
e
can be opened . Note also the labels OPEN and
CLOSE with the corresponding arrows on the catches w of the battery
compartment
e
.
2 . Insert 6 x 1 .5 V type C/Baby/LR14 batteries (not included) into the battery
compartment
e
. Insert the batteries into the battery compartment
e
as
shown on the polarity diagram . Make sure that the strip is placed under the
batteries so that they can be easily removed again .
3 . Close the battery compartment
e
on the rear of the device and turn the
two catches w of the battery compartment e clockwise into the locked
position . Note also the labels OPEN and CLOSE with the corresponding
arrows on the catches
w
of the battery compartment
e
.
Aerial
♦ Screw the screw aerial
i
into the aerial holder .