Silvercrest SBDB 5 A1, Инструкция по эксплуатации и правила безопасности

Страница: 53 / 106

■ 50 │
GB
│
MT
SBDB 5 A1
♦ Press the TUNE+
9
or TUNE− button
8
until Manual tune appears on
the display
1
.
♦ Press the ENTER / SCAN button
3
to confirm the selection . The
display
1
shows the receivable DAB+ radio stations with the respective
multiplex numbers and frequencies .
♦ Press the TUNE+
9
or TUNE− button
8
to select a station .
♦ Press the ENTER / SCAN button
3
to confirm the selection .
The display
1
shows the station signal strength as a bar graph .
♦ Move the screw aerial
i
or change the setup location of the device to
improve the signal strength of a station .
Pay attention to the bar graph showing the signal strength . For optimum
signal strength, the bars should be as high as possible .
Saving stations manually
♦ Press the TUNE+
9
or TUNE− button
8
to select a DAB+ radio station
from the station list .
♦ Press the PRESET button
7
for about 2 seconds . The display
1
shows
the station preset with the last selected radio station (if radio stations have
already been stored) . If no radio stations have yet been stored, the dis­
play
1
shows Preset Store preset 1 empty .
♦ Press the TUNE+
9
or TUNE− button
8
to select the desired preset .
♦ Press the ENTER / SCAN button
3
to store the station in the selected
preset space . The preset space of the stored station is shown in the upper
right corner of the display
1
(e .g . P1 for preset 1) .
NOTE
► Stored radio stations are overwritten if you store other stations in station
presets that are already occupied .
Calling up saved stations
♦ Briefly press the PRESET button
7
to call up the DAB+ radio stations stored
in the station presets . Preset ReCall appears on the display
1
.
♦ Press the TUNE+ 9 or TUNE– button 8 to select a radio station stored
in the station presets . After approx . 2 seconds, the displayed station plays
automatically . Alternatively, briefly press the
ENTER / SCAN
button
3
to listen to the selected station .