Silvercrest SBDB 5 A1, Инструкция по эксплуатации и правила безопасности, Страница: 55 / 106

■ 52 │
GB
│
MT
SBDB 5 A1
♦ Press the ENTER / SCAN button
3
for approx . 2 seconds to start
the automatic station scan with station saving . The display
1
now shows
the message Scanning... FM and the number of found stations . The scan
progress is displayed as a progress bar . The FM radio stations found are
automatically stored in the station list on order of increasing frequency .
When the scan is finished, the first station in the station list is automatically
played back .
NOTE
► An automatic station scan with station saving may overwrite an existing
station list .
Selecting stations
♦ Press TUNE+
9
or TUNE−
8
to select an FM radio station from the
station list .
Manual station scan
♦ Briefly press the ENTER / SCAN button
3
to switch to the next
receivable station with a higher or lower frequency .
NOTE
► The frequency of the station is shown on the display
1
and the
speaker
6
is switched off during the station scan .
Saving stations manually
♦ To store the current radio station manually, first press the
PRESET
button
7
for approx . 2 seconds . Preset Store appears on the display
1
. If any ra­
dio stations have been stored already, the station preset containing the last
radio station selected is displayed . If no radio stations have yet been stored,
the display shows
Preset Store Preset 1 empty .
♦ Press the TUNE+
9
or TUNE− button
8
to select the desired preset .
♦ Press the ENTER / SCAN button
3
to store the station in the selected
preset space . The preset space of the stored station is shown in the upper
right corner of the display
1
(e .g . P1 for preset 1) .
NOTE
► Stored radio stations are overwritten if you store other stations in station
presets that are already occupied .
Calling up saved stations
♦ Briefly press the PRESET button 7 to call up the FM radio stations stored in
the station presets . Preset ReCall appears on the display
1
.
♦ Briefly press the TUNE+
9
or TUNE– button
8
TO select a radio station
stored in the station presets .