GB
│
IE
│
11
■
SAST 18 A1
Charging
NOTE
►
Check to ensure that the On/Off switch
q
has been pushed back (to the
position "OFF") before starting the charging process .
■
Hang the appliance into the wall bracket
7
from above . The catches on the
wall bracket
7
should slide into the recesses on the motor unit
r
and the
barrel plug
9
into the socket on the lower end of the motor unit
r
. The
charge indicator lamp
w
flashes red and the charging process begins .
■
When charging is complete, which can take around 5 to 5 .5 hours with fully
discharged batteries, the charge indicator lamp
w
lights up green . The
appliance automatically switches to trickle charging . Nevertheless, in order
to avoid possible damage to the batteries, do not leave the appliance
permanently connected to the mains adapter
0
.
■
Recharge the batteries again if the appliance’s suction power becomes
appreciably weaker and the charge indicator lamp
w
flashes green .
NOTE
►
If the charge indicator lamp
w
flashes alternately green and red, the
battery is almost completely discharged and the appliance switches off
after approx . 1 minute . This protects the appliance from deep discharge .
►
The appliance can also be charged directly via the mains adapter
0
. To
do this, remove the barrel plug
9
from the wall holder
7
with a slight
twist and insert it into the socket on the appliance .
►
The appliance cannot be operated during charging .
Содержание SAST 18 A1
Страница 3: ...4 1 2 q 0 8 6 3 5 9 w r e 7 t z u i ...