- 18 -
Repeat function with MP3/WMA/MPEG/ JPEG/Xvid discs
During playback press the
REPEAT
button several times to apply the following
repeat functions (the set function appears in the display):
RANDOM
Random playback of the titles on the disc and/or the data carrier.
SINGLE
One time playback of the current title/image.
REPEAT ONE
Endless repeat of the current title/image.
REPEAT FOLDER
Repeat the current folder.
REPEAT ALL
Repeat all titles on the disc and/or data carrier.
Repeat sequence (A–B)
With this function you can repeat playback of a favourite sequence within
a chapter of the current playback disc.
To do this …
• During playback press the
A – B
button on the remote control as soon as the
desired sequence starts to playback.
A
appears on the television screen.
• Press the
A – B
button again as soon as the end of the desired sequence is
played back. Pay careful attention to the fact that the start and finish of
the sequence must be located within a chapter.
AB
appears on the television screen.
Repeat playback of the selected sequence begins immediately without you
having to press the
PLAY/PAUSE
button. The sequence will continuously re-
peat until you press the
A – B
button again in order to switch off the function.
Setting playback volume
Press the
VOL +
button on the remote control during playback to increase play-
back volume or the
VOL –
button to reduce playback volume.
Dimmer
Press the
DIMMER
button on the remote control to change the DVD player's
display brightness in three levels.
To switch playback sound to mute (MUTE)
To switch the playback sound to mute press the
(
MUTE
) button on the remote
control during playback of DVDs, VCDs/S-VCDs, audio CDs and CD-Rs/CD-RWs
with MP3 or WMA data.
MUTE
is displayed on the television screen.
When you want to switch the playback sound back on press the
(
MUTE
) button
again or the
VOL +
and
VOL –
buttons.
MUTE OFF
or the corresponding volume
level is displayed on the television screen.
Switching off the DVD player
To switch off the DVD player:
•
In the event that a disc inserted into the DVD player is playing back, first
cancel playback by pressing the
STOP
button on the front panel of the
DVD player or on the remote control twice.
•
Open the disc tray to remove a currently inserted disc from the DVD
player by pressing the
OPEN/CLOSE
button on the front panel of the
DVD player or on the remote control. Subsequently close the disc tray
by pressing the
OPEN/CLOSE
button again.
•
Press the
STANDBY
button on the remote control. The DVD player now
switches to the
STANDBY
mode. To switch the DVD player back on press
the
STANDBY
button again.
•
To switch the DVD player off completely activate the
POWER
switch on
the rear panel of the DVD player.
13. Playback of JPEG-Photo
CD/WMA/MP3/MPEG4
Insert a storage medium into the DVD player. If you use a memory card or
USB stick press repeatedly the
USB
button until the desired playback source
is depicted.
The contents of the data carrier (CD, DVD, USB memory stick or memory card)
will be displayed on the television:
Display of MP3 data
Display of JPEG data
Display of AVI and MPEG data
• The data is listed on the left (Data window). Folders will be depicted with
the symbol
.
