Silvercrest KH 2346, Руководство по эксплуатации

Страница: 22 / 28

- 20 -
Uninstall or repair
When you want to remove the software (uninstall) or reinstall, in the event of
a malfunction, first proceed as described in the chapter „Driver installation“.
The software automatically recognizes that this is already installed and
therefore accesses, as opposed to the initial installation, the following
selection.
• Click on
„Repair”
, when you want to reinstall the driver and test
programme (i. e. because the device manager could not find the
webcam or no image is displayed).
• Click on
„Remove”
, when you want to remove the driver and the test
programme from your computer.
• Click on
„Modify”
, when you want to add new programme features or
remove already installed programme features.
Reboot your operating system if after installing the driver again the
camera is still showing no image. If this does not improve the situation
then there is a conflict with some other computer component. In this case,
contact your computer dealer.
IB_KH2346_V439_GB_LB3 19.12.2007 17:46 Uhr Seite 20