Silvercrest KH 2346, Руководство по эксплуатации

Страница: 10 / 28

- 8 -
The total power consumption must not exceed 500 mA otherwise it is
possible that some devices will not function properly or not function
at all. The power consumption of the webcam amounts to 140 mA.
Connecting the headset:
• Insert the red and green plugs 0 from the headset into the red and
green sockets q on the Hub.
Connecting the webcam:
• Insert the USB plug 4 into the USB connector e on the top of the
Hub. This will be recognized by the computer and the following
message appears on the bottom right of the screen:
„Found new hard-
ware“
. It could be a few minutes before the message appears to
indicate that the webcam has been installed and is ready for use.
Info: The webcam has built in object lighting (4 white LEDs next to the
lens). These switch on and off automatically according to the lighting
circumstances. For this no connections or settings are required.
Device use
When the device has been properly installed it is registered as such in
the PC. Applications, which need this device as, for example, internet
telephones or a video chat programme, and are automatically accessed.
The operation then arises from the respective application.
Hub use:
• The operation of the Hub is restricted to the connecting and discon-
necting of the respective USB device. Whether this is also possible
in the current operation is solely dependent on the computer and
IB_KH2346_V439_GB_LB3 19.12.2007 17:46 Uhr Seite 8