38
Note:
During a traffic announcement, it’s possible to adjust the volume to the current requirements at any time through the control
dial .
“EON”: Automatic station switching for traffic announcements
The “EON” function is an additional RDS service. If the current program doesn’t offer any traffic announcements, EON
automatically switches to the traffic announcements on another program. After the end of the announcement, the device
switches back to the previously heard station. The readiness for traffic announcements “TA” has to be activated for this.
To activate the “EON” function, press the control dial until menu level 2 is reached. The “INVOL” function will appear. Press
the control dial until you get to the menu item “EON”. There you will have the option of activating (ON) or deactivating (OFF)
the function by turning the dial. If the “EON” function is activated, “EON” will appear on the display.
The setting is saved either when the desired value is confirmed by pressing the control dial or through automatic storage
(don’t change anything on the device for approx. five seconds). If you confirm the selection by pressing the control dial you
will reach the next possible setting. If you use the automatic storage, the device will return to the standard display.
“REC”: Settings for the recording function
This menu item gives you the option of selecting between WMA and MP3 coding while recording. The recording function will be
described in detail below under 17.3.
To reach the menu, press the control dial until menu level 2 is reached. The “INVOL” function will appear. Now briefly press
the control dial until you reach the menu item “REC”. There you will have the option of selecting between “WMA” and “MP3”
by turning the dial.
The setting is saved either when the desired value is confirmed by pressing the control dial or through automatic storage
(don’t change anything on the device for approx. five seconds). If you confirm the selection by pressing the control dial , you
will reach the next possible setting. If you use the automatic storage, the device will return to the standard display.
“TELVOL”: Standard volume for telephone conversations
The “TELVOL” function enables an adjustment of the volume for telephone conversations according to individual preferences.
To change the device’s volume for telephone conversations, press the control dial until menu level 2 is reached. The
“INVOL” function will appear. Press the control dial repeatedly until you get to the menu item “TELVOL”. There you have the
option of setting the device’s volume for telephone conversations by turning the dial. Turning to the right increases the volume
for telephone conversations, turning to the left reduces the volume for telephone conversations. The volume for telephone
conversations can be set for between 0-45. Here 0 = no sound and 45 = maximum volume of the device.
The setting is saved either when the desired value is confirmed by pressing the control dial or through automatic storage
(don’t change anything on the device for approx. five seconds). If you confirm the selection by pressing the control dial , you
will reach the next possible setting. If you use the automatic storage, the device will return to the standard display.
