36
The message “FAD” will appear on the display along with the set volume ratio between the front and rear speaker group (e.g.
“FAD 2F”). To change the ratio between the speaker groups, turn the control dial clockwise or counter-clockwise. Depending
on the direction in which the control dial is turned, an “R” or an “L” will appear on the display, together with a digit (e.g. “2F“ or
“3R“). These provide information about the direction in which the volume ratio is changed and about the amount of the change.
The ratio between the right and left speaker group can be set in a range between “8F” and “8R”.
The volume ratio between the speakers changes according to the setting. The volume of one speaker group increases, the
other decreases.
Note:
If the ratio is set to “0”, the volume on both speaker groups is the same.
If the control dial for one of the two speaker groups is turned to the maximum setting “8”, the other speaker group is muted.
To change this, turn the control dial again.
The setting is saved either when the desired value is confirmed by pressing the control dial or through automatic storage
(don’t change anything on the device for approx. five seconds). If you confirm the selection by pressing the control dial , you
will reach the next possible setting. If you use the automatic storage, the device will return to the standard display.
Note:
After pressing the control dial six times, the volume setting is reached again. If no changes are made for 5 seconds, the
device will automatically return to the initial display.
17.2 Menu level 2
Menu level 2 is reached if the control dial is pressed for approx. two seconds. The individual menu items can be reached by
repeatedly pressing the control dial.
On menu level 2, the functions “INVOL” (initial volume), “ADJ” (setting the time), “TAVOL” (standard volume for traffic
announcements), “EON” (automatic station change for traffic announcements), “REC” (recording function settings), “TEVOL”
(standard volume for phone conversations), “DSP” (tone settings), “LOUD” (tone setting), “LOC” (distance setting for station
search), and “STEREO” (switching between stereo and mono playback) can be set.
