Silvercrest 36792101, Руководство по эксплуатации

Страница: 46 / 64

GB
│
MT
│ 43 ■ SKM 650 A1
NOTE
►
If you wish, you can fit the filling acces-
sory
8
onto the lid
9
(Fig . 2):
– Press the filling accessory
8
into the
cut-out on the lid
9
.
Now you can add ingredients even during
operation .
Fig . 2: Fitting the filling accessory
7) Push the lid
9
onto the mixing bowl
6
.
8) Turn the rotary switch
3
to the required
level (see the section "Speed settings") .
After you have finished using your
appliance
1) Turn the appliance off using the rotary
switch
3
(Position "OFF") .
2) Remove the lid
9
from the mixing bowl
6
.
3) Push the release button
2
and move
the swivel arm
1
to the highest position .
4) Remove the attachment
0 q w
from the
drive shaft
7
by pushing the attachment
0 q w
against the drive shaft
7
and
turning clockwise (direction ) at the
same time . Then you can remove the at-
tachment
0 q w
.
5) Remove the mixing bowl
6
by turning it
anticlockwise and then pulling it upwards .
6) Clean the appliance (see section "Clean-
ing and care") .
Cleaning and care
DANGER! RISK OF ELECTRIC
SHOCK!
►
Before cleaning the appliance, discon-
nect the power plug from the mains
power socket! There is a risk of electric
shock!
Never immerse the appliance in water
or any other liquid!
ATTENTION! PROPERTY DAMAGE!
►
Do not use abrasive or aggressive clean-
ing materials . These may damage the
surfaces .
NOTE
►
We recommend cleaning the appliance
directly after use . This makes food resi-
dues easier to remove .
Cleaning the housing
■
Wipe the housing with a damp cloth . For
stubborn soiling use a mild detergent on
the cloth . Wipe off any detergent residue
using a cloth moistened with clean water .
Then dry the appliance carefully .
Cleaning the accessories
■
Clean the mixing bowl
6
, the lid
9
, the
filling accessory
8
and the kneading
hook
0
, the whisk
q
and the beater
w
in warm water with a little washing-up
liquid . Any residues can be removed with a
washing-up brush . Rinse all parts with warm
clean water and make sure that all parts
are dry before re-using them .