English
- 7 -
Using Digital Multimedia
Connectors
You can connect USB devices to your TV by using
•
the USB input of the TV. This feature allows you to
display/play JPG, MP3 and video les stored in a
USB stick.
It is possible that certain types of USB devices (e.g.
•
MP3 Players) may not be compatible with this TV.
You may back up your les before making any
•
connections to the TV set in order to avoid any
possible data loss. Note that manufacturer will not
be responsible for any le damage or data loss.
Do not pull out USB device while playing a le.
•
CAUTION: Quickly plugging and unplugging
USB devices, is a very hazardous operation.
Especially, do not repeatedly quickly plug and
unplug the drive. This may cause physical damage
to the TV and especially the USB device itself.
SIDE VIEW USB DEVICE
NOTE: It is possible that certain types of hard disk
drives are not supported.
Connecting the LCD TV to a
PC
For displaying your computer’s screen image on your
LCD TV, you can connect your computer to the TV set.
Power off both computer and display before making
any connections. Use 15-pin D-sub display cable to
connect a PC to the LCD TV. When the connection
is made, switch to PC source. See “Input selection”
section. Set the resolution that suits your viewing
requirements. Resolution information can be found
in the appendix parts.
Connecting to an external device
If you want to connect a external device to your LCD
TV, you can use connectors of the TV set.external
devices may have different connectors. Please refer
to your external device’s instruction book for additional
information. Power off both the TV and the device
before making any connections.
If your external device has an HDMI socket, you can
•
connect via HDMI. When you connect to external
device as illustrated below, switch to HDMI source.
See, “Input Selection” section.
Most external devices are connected through
•
COMPONENT SOCKETS. Use a component
video cable to connect video input. For enabling
audio, use a component audio cable. When the
connection is made, switch to YPbPr source. See,
“Input selection” section.
You may also connect through the SCART 1 or
•
SCART 2. Use a SCART cable.
Note: These three methods of connection perform the
same function but in different levels of quality. It is not
necessary to connect by all three methods.
56966-LCD-TV-32111-DVB_T-GB-1241110_10071112_50179828.indd 7
24.11.2010 14:59:20
