Silvercrest 320214, Руководство по эксплуатации

Страница: 30 / 116

GB
│
IE
│ 27 ■ SKMK 1000 A1
5) Wipe the appliance with a damp cloth . If required, use a mild washing-up
liquid on the cloth . Ensure that there are no detergent residues on the appli-
ance, and that the appliance is completely dry before using it again .
Descaling
Descale the appliance at regular intervals .
NOTE
► Depending on the hardness of your water, the necessary descaling
intervals may vary considerably . If your water is very hard, descaling is
generally necessary after approximately 30 uses, while less hard water
only requires you to descale your appliance after approximately 60 uses .
Your local water supplier can tell you about the hardness of your water .
Use only descaling agents that are specifically suitable for coffee machines and
follow their usage instructions closely .
Proceed as follows to descale:
1) Add the descaling agent to the water tank
0
.
2) Add the amount of water as specified in the usage instructions for the
descaling agent, but do not exceed the MAX mark (10 cups) on the fill level
indicator
4
!
3) Set the coffee pot
6
back on the hotplate
7
.
4) Press the button
5
to start the brewing process . The button
5
lights
up .
5) Wait until enough water for approximately 2 cups has run through the
machine, then stop the brewing process by pressing the button
5
again .
6) Allow the descaling agent to take effect for 15 minutes .
7) Repeat steps 4 to 6 twice .
8) Then start the brewing process and wait until the water has run through
completely .
9) Allow the coffee machine to brew three times with the maximum amount of
clean water . After three brewing cycles, all residues of the descaling agents
are removed and you can use your coffee machine again .