18 GB/IE
Disposal / Warranty / Service
Maintenance and cleaning / Troubleshooting / Disposal
First, remove the HEPA / activated carbon pre-fil-
ter
6
and then the activated carbon filter
7
(see Fig. CII and CIII).
Insert a new activated carbon filter
7
in the
product first, then insert the HEPA / activated
carbon pre-filter
6
. The black side of the
HEPA / activated carbon pre-filter
6
must be
facing forward.
Close the front cover
5
as depicted in Figure
CIV.
Hold the filter button
13
pressed for approx.
3 seconds until the beep sounds and the LED
on the button goes out.
Note:
Replacement filters can be ordered online at
www.shop.targa.de.
Troubleshooting
Problem
Possible cause
Solution
The ON / OFF button
12
is
not responding.
The product is not connected to
the power circuit.
Insert the mains plug
4
into the
mains socket.
The fuse is at the 0 setting or is
defective.
Set the fuse in your fuse box to the I
setting or replace the fuse.
Power failure
Wait until the power has been
switched on again.
The front cover
5
has not been
assembled correctly.
Remove the front cover
5
and close
it as depicted in Figure CIV.
The product is unusually loud
during operation.
The product is standing at an an-
gle or is on an uneven surface.
Place the product on a stable, even
surface.
A filter
6
,
7
is clogged.
Clean the HEPA / activated carbon
pre-filter
6
and replace the acti-
vated carbon filter
7
. To do so,
proceed as described in the chapter
“Maintenance and cleaning”.
The air inlet and air outlet
8
,
3
are covered or blocked.
Ensure that the air inlet and air outlet
8
,
3
are not covered or blocked.
Disposal
The packaging is made entirely of recyclable mate-
rials, which you may dispose of at local recycling
facilities.
b
a
Observe the marking of the packaging
materials for waste separation, which
are marked with abbreviations (a) and
numbers (b) with following meaning: 1–7: plastics /
20–22: paper and fibreboard / 80–98: composite
materials.
The product and packaging materials
are recyclable, dispose of it separately
for better waste treatment. The Triman
logo is valid in France only.
Contact your local refuse disposal
authority for more details of how to
dispose of your worn-out product.
This label indicates that this product may
not be disposed of in the domestic waste
throughout the entire EU. To prevent po-
tential environmental damage or damage to human
health due to unregulated waste disposal, please
296100_silv_Luftreiniger_content_OS.indd 18
18.09.18 17:00
