SilverCrest SMBC 30 A1
English - 43
8. Before you start
Connect the plug of the
power cable [C]
supplied into the
power input [25]
on the back
of the Micro Stereo System.
Plug the mains plug into an easily accessible mains socket.
When laying the
power cable [C]
, make sure it cannot cause a trip
hazard.
Unwind the
wire antenna [D]
completely.
Connect the connector of the
wire antenna [D]
supplied into the
antenna connector
[21]
on the back of the Micro Stereo System.
If you have a fixed roof antenna you can use it instead of the
wire antenna
[D]
.
8.1. Activating the remote control battery
Remove the plastic strip from the remote control battery compartment. The remote control is now
ready for use.
Please also read the safety instructions for the coin cell battery in the “Safety
instructions” chapter.
9. Getting started
9.1. Switching the Micro Stereo System on/off
Toggle the
main power switch [24]
on the back panel of the Micro Stereo System to “I” to
power the Micro Stereo System on. You can turn the device off by toggling the
main power
switch [24]
to “0”. As soon as the
main power switch [24]
is moved to “I”, you can press
the
On/Standby button [17]
to power the Micro Stereo System on or switch to standby mode.
You can also use the
On/Standby button [26]
on the remote control.
Please note that all settings will be lost when switching the Micro Stereo System
off with the
main power switch [24]
.
Содержание 279334
Страница 1: ......
Страница 2: ......
Страница 3: ...V 1 35 Deutsch 2 English 30 Français 58 Nederlands 88 Čeština 116 Español 144 Português 172 ...
Страница 202: ......