7
GB
6. Installation
DANGER! Risk of injury from
cutting!
~
The blade insert
8
, the grating disk
5
and slicing insert
4
are sharp. Handle
with care.
~
Only plug the mains plug
14
into the
wall socket after the food processor has
been completely assembled.
NOTE:
• The device is equipped with a
safety
switch
. The bowl
11
can only be
locked with a closed lid
3
and can only
be put into operation once it's locked.
1.
Figure A:
place the bowl
11
on the mo-
tor block
15
. The symbol
16
points to
the bottom marking on the bowl
12
. Do
not
turn the bowl.
2. Place the drive axle
9
in the bowl.
3.
Figure E:
if required, place the slicing
insert
4
/ grating disk
5
into the insert
holder
6
.
4. Place the dough blade
7
, the blade in-
sert
8
or the insert holder
6
with at-
tached slicing insert
4
/ grating disk
5
on the drive axle
9
.
5. Dough blade
7
/ Blade insert
8
: Fill the
prepared foodstuffs into the bowl
11
,
as desired.
6.
Figure A+B:
place the lid
3
on the
bowl
11
. The symbol
2
points to the
top marking on the bowl
10
.
7.
Figure B+C:
turn the lid
3
in a clock-
wise direction as far as it will go, until
the symbol
2
points to the top mark-
ing on the bowl
10
.
8.
Figures C+D:
turn the bowl
11
in a
clockwise direction as far as it will go,
until the symbol
16
points to the bot-
tom marking on the bowl
12
.
9. Insert the mains plug
14
into a wall sock-
et corresponding to the technical data.
7. Operation
DANGER! Risk of injury from
cutting!
~
The insert holder
6
, the blade insert
8
and the dough blade
7
keep on turning
after the device has been turned off.
Please wait until all parts have come to
a standstill before unlocking the
bowl
11
and opening the lid
3
.
~
The device must never be operated with-
out the bowl
11
.
WARNING! Risk of material dam-
age!
~
In order to prevent damage to the de-
vice, interrupt the blending process im-
mediately if the insert holder
6
, the
blade insert
8
and the dough blade
7
are not turning or are turning with diffi-
culty. If this happens, pull out the mains
plug
14
and check whether there is
something in the bowl
11
blocking
movement or whether the food is too
tough. Also check whether the device is
assembled correctly.
CAUTION:
~
Depending on the hardness and consist-
ency of the foodstuffs, do not fill the
bowl
11
to the maximum, as the insert
holder
6
, the blade insert
8
and the
dough blade
7
could get blocked. Pay
attention here to the guideline values for
various foods in the "Processing table"
section.
NOTE:
• For chopping harder foodstuffs, use the
setting
P
. Work with short pulses
(1 pulse: turn on
P
for approx. 1 sec-
ond). The number and length of the puls-
es will depend on the quantity and
consistency of the food.
__CPE273409_Kuechenmaschine_B4.book Seite 7 Mittwoch, 18. November 2015 9:00 09
