3. Insert the inflation adapter to the
valve. Secure the adapter by turning it
clockwise. Connect the pressure gauge
and pump to the adapter. Start inflat-
ing until the pressure reach 0.25 bar.
4. Remove the pressure gauge and pump. Put the cap on
the valve.
STEP TWO: INFLATION
After inflating the tubes, insert the barometer against the valve. Check if the pressure in the air chambers
reaches 0.25 bars, then remove the barometer and screw the cap on.
STEP THREE:
SEAT AND BENCH SEAT BAG ASSEMBLY
1. Seat assembly
Once you have finished inflation, hook the plastic brackets at the bottom of the plywood bench into the
PVC straps on your Silver Marine® boat.
2. Seat bag assembly
After the Seat Assembly, attach the bench seat bag onto the bench seat.
6
