Silvan Selecta Stiletto 2000L, Руководство оператора

Страница: 14 / 28

13
Operation
From the chemical manufacturer’s instructions
determine the quantity of chemical that needs to
be added to the tank to achieve the correct
strength of solution.
Fill the sprayer with about 500 litres of water
through the rear tank opening and engage the
PTO with the tractor running slowly until the pump
is primed.
Open the inductor “Empty” valve to commence
the venturi action. Then open the front lid of the
tank, pour the chemicals into the receptacle and
allow the suction to empty them into the tank. It is
preferable, but not essential, to close the lid whilst
the chemicals are emptying into the tank.
When the receptacle is empty, open the “Rinse”
valve to wash any residue into the tank. Close
both inductor valves and the tank lid and continue
to run the sprayer to complete filling the tank with
water through the rear opening. During this time
the by-pass flow and the venturi agitator will
thoroughly mix the solution.
Note: This is the only operation permitted with the
sprayer running while the operator is off the
tractor.
Adding Chemicals to the Stiletto Sprayer
Fill the sprayer with about 500 litres of water
through the larger tank opening and engage the
PTO with the tractor running slowly until the pump
is primed.
From the chemical manufacturer’s instructions
determine the quantity of chemical that needs to
be added to the tank to achieve the correct
strength of solution. Add the required chemical
through the filter basket in the larger lid opening
of the tank.
Complete filling the tank with water through the
larger lid opening. During this time the by-pass
flow and the venturi agitator will thoroughly mix
the solution.
Note: This is the only operation permitted with the
sprayer running while the operator is off the
tractor.
Emptying the Sprayer
At the end of each day partly fill the tank with
water and run this through the pump, spray lines
and nozzles to purge them of chemicals. Use a
cleaning agent such as Silvan All Clear tank
cleaner.
Rinse the tank through the lid and empty with the
drain valve to remove powdered material. Never
leave chemicals in the tank that could settle to the
bottom and break into lumps that may block the
suction filter.
Dispose of unused chemical mix, rinse water and
containers as recommended by the chemical
manufacturer or government authority.
Road Travel
When towing the sprayer on a public road always
ensure that it is equipped with all the necessary
lights and signs to comply with local regulations.
Travel at slow speed and only with the main tank
empty. The weight of the sprayer with a full tank
could overload the braking capability of the tractor
and result in an accident.
CAL INDUEECTOR SYSTEM
Chemical Inductor System